| 1973 |
※ Our factory was built on July 1, 1973.
※
The company was established on October 29, 1973, with capital amount of NT$5,000,000 , is a professional wound core and stack core transformer manufacturer. |
| 1974 |
※ We start to produce and sell distribution transformer in March 1,1974.
|
| 1975 |
※
The first delivery of Pole-mounting distribution transformation to T.P.C. was accomplished.
※We were certified as the " second class factory" of making 24KV transformer and the "first class factory" of making 15KV transformer by Ministry of Economic Affairs industry bureau. |
| 1976 |
※The sum of capital increased to NT$10,000,000.
※The first shipments of transformer to Malaysia were accomplished. |
| 1977 |
※In order to improve our production ability of 69KV transformer, we extended our factory facilities by purchasing production and lab equipment.
|
| 1978 |
※
We were certified as the "first class factory" of making 24KV and 15KV transformer again and also certified as the “second class factory” of making 69KV transformer by Ministry of Economic Affairs industry bureau.
|
| 1979 |
※We are certified as B level factory for producing transformer on exportation purpose by Ministry of Economic Affairs Bureau of Commodity Inspection and Quarantine for quality control.
※The first shipments of transformers to Thailand were accomplished. |
| 1980 |
※We were certified for the second time as the "first class factory" of making 24KV and 15KV transformer and also certified as the “second class factory” of making 69KV transformer by Ministry of Economic Affairs industry bureau. |
| 1981 |
※We provided the whole plant export to Thai Maxwell Electric Co., LTD.
※We were successfully exporting transformer to Indonesia, middle east and South America. |
| 1982 |
※We provided the whole plant export to P.T. MORAWA CO. in Indonesia.
※The development of UNIT SUBSTATION was carried out in order to fulfill the demand of exportation market.
※We were certified as the well-qualified transformer supplier for Taiwan market by Ministry of Economic Affairs Bureau of Commodity Inspection and Quarantining. |
| 1983 |
※We are certified as A level factory for producing transformer on exportation purpose by Ministry of Economic Affairs Bureau of Commodity Inspection and Quarantine for quality control.
※Signing contract with MGM for the technical cooperation of Pad-Mounting and under-water transformer production for Taiwan market. |
| 1984 |
※Signing up contract with A.C.E. company in Belgian for the technical cooperation of producing Cast resin transformer for Taiwan market.
※Obtaining the “MAXELEC” trademark from central standard bureau in Ministry of Economic Affairs.
※Obtained the Good Quality Certification from Central Standard Bureau.
※Complete the type test of single phase Pad-Mounting transformer for T.P.C. |
| 1985 |
※Shipped out shipments to South America and middle east region.
|
| 1986 |
※The sum of capital increased to NT$20,000,000.
|
| 1987 |
※Purchased latest testing equipment in order to improve production quality.
※The Ministry of Economic Affairs investment committee approved the contract for the cooperation with A.C.E.C. company. |
| 1988 |
※Finished the type-test of three phase and single phase Pad-Mounting transformer with standless shell for T.P.C..
※Promoting the production and sale of Cast Resin Transformer in Taiwan Market and finished the type-test of Cast Resin Transformer for T.P.C..
※Started development project with Muja Vocational High School of Science. |
| 1989 |
※Enhanced the cooperation with PAUWELS who owns the A.C.E.C..
※the B level quality certification of nuclear power from T.P.C..
※The sum of capital increased to NT$40,000,000.
|
| 1990 |
※Obtaining the qualification of producing single phase under-ground transformer from T.P.C..
※Launching the development of Amorphous transformer. |
| 1991 |
※Completed the development of Amorphous transformer and also get the certification from T.P.C. testing center.
※Completing the development of lower down the transformer loss by 35% for T.P.C..
※Cooperated with T.P.C. to develop solution to lower the non-load loss of 50% and load loss of 35% of different type of transformers.
※Purchased full set of equipment for cut-core production.
|
| 1992 |
※Finished the type-test of lower transformer loss of 50% of different type of transformer for T.P.C.. |
| 1993 |
※ The amount of capital increased to NT$70,000,000.
※Purchasing new factory and domotory and the total space is 6767 s/m.
※Purchasisn new wound core equipments for larger transformer.
※Purchasisn new coil winding equipemnts for production of primary and secondary coil.
|
| 1994 |
※Grant the ISO-9002:1994 certification from D.N.V. company.
※The installation of production equipments of second factory was finished.
|
| 1995 |
※The installation of tunnel type vaccum oil pulling machine was accomplished.
|
| 1996 |
※Began the production of wound cut-core of cast resin transformer for Japan market.
※Purchase more pouring equipments for cast resin coil production.
※Purchase more drying equipments for cast resin coil production.
|
| 1997 |
※Enhance the development of CT2, CT3 cast resin transformer for Japan market.
※Purchased more copper and alumimun winding machines in order to improve production quality. |
| 1998 |
※The amount of capital increased to NTD$95,000,000. |
| 1999 |
※Purchasing two set of automatic step-lap core winding machines from TRANCO company for core production. |
| 2000 |
※Certified by DNV for the ISO-9001:1994 of quality control system. |
| 2001 |
※The development of under-water transformer was successfully finished for T.P.C. |
| 2002 |
※Certified by DNV for the ISO-9001:2000 of quality control system. |
| 2003 |
※Purchasing second set of furnance equipment for wound core production. |
| 2004 |
※Shipped out the shipment of 20,000 sets of Pole-Mounting transformer to T.P.C.. |
| 2005 |
※Certified by DNV for the ISO-9001:2000 of quality control system.
|
| 2006 |
※Starting to export wound cores to China, Thailand, Vientman, Indonesia....etc..
※Successfully certified by T.P.C for type-testing of Pole-Mounting transformer.
|
| 2008 |
※Certified by DNV for the ISO-9001:2000 of quality control system. |
| 2009 |
※Purchasing third set of furnance equipment for wound core production. |
| 2010 |
※Accomplished new factory building for sliding process.
※Install new sliding plaint of electric steel plate and enhance our production ability. |
| 2011 |
※Certified by DNV for the ISO-9001:2008 of quality control system.
|
| 2012 |
※We provided the whole plant export to YourJai transformer factory in China and this projected is finished in 2013.
|
| 2013 |
※New factory build for wounding production and quality control.
|
| 2014 |
※Certified by DNV for the ISO-9001:2008 of quality control system.
※Install two new production line of wound core.
※New factory build for stack core production.
|
| 2015 |
※Install two new production line of stack core.
|
| 2017 |
※Certified by DNV for the ISO-9001:2015 of quality control system.
|
